Pressmaster HFP-200 MWH HYDRAULIC H-FRAME PRESSES

$48,950

Make:

Pressmaster

Model:

HFP-200 MWH

Year:

New

Ref #:

158107

Get a quote

Get financing

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

---

 

200 TON PRESSMASTER H-FRAME HYD. PRESS

MODEL HFP-200 MWH         BRAND NEW

 

RATED CAPACITY, TONNAGE .......................... 200

STROKE ........................................... 20"

BORE ............................................. 12"

RAM SPEED PRESS................................... 6 IPM

RAM SPEED (Inches/minute) ADVANCE................. 24

RAM SPEED (Inches/minute) RETURN ................. 29

DISTANCE BETWEEN POSTS (RIGHT TO LEFT)............ 60"

DISTANCE BETWEEN POSTS (FRONT TO BACK)............ 18"

MAXIMUM DISTANCE FROM BED TO RAM ................. 30.5"

 

SHIPPING DIMENSIONS

OVERALL HEIGHT ................................... 108"

OVERALL WIDTH .................................... 97"

OVERALL DEPTH .................................... 58"

WEIGHT ........................................... 7,600 LBS.

 

NOT A CHEAP IMPORT -

MANUFACTURED IN CANADA WITH QUALITY US & CANADIAN COMPONENTS

 

EQUIPPED WITH:

- PRESSURE REGULATOR TO LIMIT RAM PRESSURE

- CYLINDER ACTIVATION IS FINGER TIP CONTROLLED, THE MORE THE HAND

LEVER IS ENGAGED THE MORE THE RAM MOVEMENT INCREASES, ALLOWING

THE OPERATOR TO USE THE PROPER SPEED FOR THE TASK.

- HYDRAULIC POWER LIFT TABLE CONTROLLED WITH A HAND LEVER

- ELECTRIC/HYDRAULIC OPERATION PROVIDES SMOOTH, CONSISTENT PRESSING ACTION

- OPEN SIDES TO FACILITATE WORK ON LONG PIECES

- SELF LOCKING TABLE DESIGN ELIMINATES LATERAL MOVEMENT

- FLAT RAM NOSE TO ALLOW USER TO ADAPT THE PRESS TO A SPECIFIC JOB

- LOW PRESSURE HYDRAULIC SYSTEM MAINTAINS LOWER OIL

TEMPERATURES, RESULTING IN HIGHER EFFICIENCY AND SAFER

OPERATION

- HIGH CAPACITY 20 GALLON HYDRAULIC OIL RESERVOIR

- LOW SPEED, 10 HP, 3 PHASE BALDOR MOTOR-STANDARD VOLTAGES AVAILABLE

- FULL ONE YEAR WARRANTY

- ALL HYDRAULIC AND MECHAINCAL PARTS ARE STANDARD IN THE INDUSTRY AND

READILY AVAIABLE THROUGHT NORTH AMERICA.

 

AVAILABLE OPTIONS:

- V-BLOCKS ................................... $1,250 SET

- STOP / START & EMERGENCY STOP .............. $900

- FRONT OR BACK SAFETY GUARD ................. $900 EA

- SIDE SAFETY GUARD ..............(PER SIDE).. $600

- FOOT PEDAL ................................. $3,400

- ADJ. STROKE CONTROL C/W FOOT PEDAL ......... $5,000

- 24” STROKE CYLINDER ........................ $1,400

- PRESS PLATE ................................ $3,500

- COMPREHENSIVE SAFETY PACKAGE WITH EMERGENCY STOPS AND

LEXAN GUARDING ............................... $7,600

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.