Pressmaster RTP-100T HYDRAULIC H-FRAME PRESSES

$35,950

Make:

Pressmaster

Model:

RTP-100T

Year:

New

Ref #:

150371

Get a quote

Get financing

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

---

 

 100 TON PRESSMASTER ROLL-IN TABLE

FULL 4 AXIS POWERED

STRAIGHTENING PRESS

 

RATED CAPACITY .............................. 100 TONS

WIDTH BETWEEN UPRIGHTS ...................... 48"

DEPTH BETWEEN POSTS ........ ................ 13-1/4"

MAXIMUM RAM TO TABLE ........................ 32"

STROKE ... .................................. 16"

TABLE TRAVEL ................................ 23-1/4"

FLOOR TO TABLE TOP .......................... 24.75"

CYLINDER BORE SIZE .......................... 9"

PRESSING SPEED .............................. 19 INCH/MIN

RETURN SPEED ................................ 24 INCH/MIN

 

MOTOR SPECS: 10 HP, 230/460 VOLT, THREE PHASE

             (OTHER VOLTAGES AVAILABLE)

 

STANDARD FEATURES:

-VARIABLE RAM SPEED IS FINGER TIP CONTROLLED THE MORE

THE HAND LEVER IS ENGAGED THE MORE THE RAM MOVEMENT IS

ACCELERATED. THIS ALLOWS THE OPERATOR TO CONTROL

THE PROPER SPEED FOR THE TASK.

-PRESSURE REGULATOR TO CONTROL THE AMOUNT OF PRESSURE

REQUIRED

-ELECTRIC/HYDRAULIC OPERATION PROVIDES SMOOTH, CONSISTENT

PRESSING ACTION.

-HYDRAULIC POWERED MOVABLE TABLE ALLOWS FOR EASY LOADING AND UNLOADING OF HEAVY WORKPIECES.

-HYDRAULIC POWERED MOVEABLE WORKHEAD FOR OFF-CENTER WORK.

-HYDRUALIC POWERED LIFT FOR VERTICAL DISPLACEMENT OF HEAD AND CYLINDER.

-OPEN SIDES TO FACILITATE WORK ON LONG PIECES.

-PANEL MOUNTED GLYCERINE FILLED GAUGE.

-SAFETY VALVE PROTECTS AGAINST OVERLOADS.

-FLAT RAM NOSE CAN BE EASILY CHANGED TO ALLOW THE USER TO

ADAPT THE PRESS TO A SPECIFIC JOB.

-LOW SPEED. QUIET OPERATION.

-HIGH-QUALITY LOW-SPEED BALDOR MOTOR.

-15 GALLON OIL RESERVOIR.

 

AVAILABLE OPTIONS:

- V-BLOCKS ................................... $850 SET

- STOP / START & EMERGENCY STOP .............. $900

- FRONT OR BACK SAFETY GUARD ................. $900 EA

- SIDE SAFETY GUARD ..............(PER SIDE).. $600

- FOOT PEDAL ................................. $3,400

- ADJ. STROKE CONTROL C/W FOOT PEDAL ......... $5,000

- 24” STROKE CYLINDER ........................ $1,400

- PRESS PLATE ................................ $1,600

- COMPREHENSIVE SAFETY PACKAGE WITH EMERGENCY STOPS AND

LEXAN GUARDING ............................... $7,600

- 54" BETWEEN POSTS .......................... $1,000  

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.