Shigiya GUA-32-150, NEW 1986, SWING DOWN I.D., UNIVERSAL CYLINDRICAL GRINDERS

Price on Request

Make:: Shigiya

Model:: GUA-32-150, NEW 1986, SWING DOWN I.D.,

Year:: 1986

Ref #:: 160921

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  12.6" x 59" Shigiya (Made in Japan) High-Precision 
    Universal I.D./O.D. Cylindrical Grinder
 
Model: GUA-32-150       S/N: 38221         New: 1986
 
Capacity
Swing over table:                         12.6"
Distance between centers:                 59"
Max. grinding diameter:                   11"
 
Wheelhead
Swivel range both right & left sides:     30 degrees each way
Spindle speed:                            1,660 & 1,880 R.P.M.
Max. Stroke (manual):                     8.66"
Max. Stroke, (automatic):                 0.3"
Rapid traverse stroke (hydraulic)         1..57"
One revolution of handwheel:              0.05"
One division of handwheel:                0.0001"
Plunge cut infeed speed, inf. variable:   0.002" to 0.12"
Traverse cut infeed speed, inf. variable: 0.00004" T0 0.004"
Number of selectable grinding passes
  before sparkout:                        0 to 30 Times
Range of Spark out duration:              0 to 30 Seconds
Grinding Wheel Size (OD x Width) x ID):   14" Dia. 
                                          1" to 2" Wide 
                                          5" Bore
 
Work Table
Table stroke:                             65"
Speed:                                    2 to 118 I.P.M.
One revolution of handwheel:              0.787"
Swivelling Range:                         7 Degrees CCW
                                          1 Degree CW
 
Workhead
Taper of Work Center:                     #4 Morse
(7) Spindle Speeds:                       20 to 380 R.P.M.
Swivel Range toward the grinding wheel:   90 Degrees
Swivel Range toward the operator's side:  30 Degrees
 
Tailstock:
Taper of work center:                     #4 Morse
Quill Stroke:                             1.18"
 
Approx. Dimensions:                       146"L-R x 67"D X 60"H
Approx. Weight:                           97000 Lbs.
 
Equipped With:
Swing down I.D. Grindning attachement with I.D. grinding spindle
Hydraulically actuated longitudinal table travel with
  wheelhead fed at either each table reversal or with the
  table stationary at the left or right hand side
Automatic grinding cycle for plunge or traverse grinding
  operations including hydraulically actuated wheelhead 
  rapid approach and retraction, coarse and fine grind
  to pre-determined stop, and individual spark-out timers
Universal motorized workhead with combinatation live/dead 
  spindle
Tailstock
Table swivelling angle measuring device
(1) Grinding Wheel Mount
(1) 2-point Steady Rest
(1) Angular Wheel Dresser
Magnetic Chuck
3-Jaw Chuck
External coolant pump and tank, with Magnetic Separator
1 HP 3/60/230-460 volt external Hydraulic Pump Motor & Tank
5 HP 3/60/230-460 volt wheelhead drive motor
Machine is presently wired for 220 volt operation
 
Special Note:
This machine has been thoroughly serviced by our staff. 
 The machine has been  disassembled, partially repainted, 
 cycled and is ready for immediate delivery.
 
** Superb Condition & Appearance **
** Inspect Under Power in our Harrison, NJ Warehouse **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.