Watch Video:

Wilton 2350 SINGLE SPINDLE DRILL PRESSES

$3,750

Make:: Wilton

Model:: 2350

Year:: 2000'S

Ref #:: 179171

Or call us for a quote at (973) 497-7500 or send us an email at boringmills@machineryvalues.com

WILTON GEARED HEAD DRILL PRESS
MODEL: 2350, S/N: 3406/942, NEW: 2000'S
 
SPECIFICATIONS: 
DRILLING CAPACITY - MILD STEEL ........... 1-7/8"
TAPPING CAPACITY - MILD STEEL ............ 1-9/16"
DRILL SWING .............................. 28"
CENTER OF SPINDLE TO FRONT OF COLUMN ..... 14"
SPINDLE TAPER ............................ #4MT
SPINDLE DIAMETER ......................... 3.228"
SPINDLE TRAVEL ........................... 9"
COLUMN DIAMETER .......................... 6.88"
TABLE SIZE (T-SLOTTED) ................... 19" X 22"
SPINDLE TO TABLE ......................... 2.67" MIN - 30.5" MAX 
SPEEDS (9) ............................... 82 - 1,524 RPM
SPINDLE FEEDS (3) ............ 0.004, .008, .012 & .016 IPR
MOTOR .................................... 3 HP
APPROXIMATE OVERALL DIMENSIONS ........... 40" X 30" X 95" H
APPROXIMATE WEIGHT ....................... 1,850 LBS.
 
EQUIPPED WITH:
POWER DOWN FEED
FORWARD AND REVERSE SWITCHES
T-SLOTTED TABLE & BASE
RACK TO RAISE AND LOWER TABLE
COOLANT SYSTEM
3 HORSE POWER DRIVE MOTOR
 
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.