Amada/Marvel HFA260P (PA260MPC) NEW HORIZONTAL BAND SAWS

 

SPECIFICATIONS & FEATURES

BLADE AT 90 ........................ 12” WIDE X 10.25” HIGH (310 X 260 MM) 10.25” (260 MM)

BLADE .............................. 1.25” L X .042” W X 12’11” H (34 X .042 X 3920 MM)

 

HYDRAULICALLY CONTROLLED TENSION (30,000 PSI) PROVIDES CONSISTENT SQUARE CUTTING ACCURACY. THE MOTION DETECTOR WILL SHUT THE MACHINE OFF SHOULD THE BLADE BREAK OR STALL.

 

65 – 330 FEET PER MINUTE (20 – 100 METERS PER MINUTE) INFINITELY VARIABLE THROUGH A FREQUENCY INVERTER DRIVE AND HEAVY-DUTY WORM GEAR TRANSMISSION. THE BROAD SPEED RANGE ALLOWS FOR OPTIMUM CUTTING OF A LARGE SPECTRUM OF MATERIALS. A READ OUT AT THE OPERATOR’S TOUCH SCREEN ASSURES ACCURATE SPEED SETTING.

 

LENGTH SETTINGS OF 0 - 16” (0 – 406 MM) ARE ACCOMPLISHED WITH SIMPLE PROGRAMMING AT THE OPERATOR’S TOUCH SCREEN. THE SHUTTLE COMES TO POSITIVE STOPS AT BOTH ENDS OF THE INDEX, ASSURING CUTOFF LENGTH ACCURACY, REDUCING MATERIAL LOSS. REPEATABILITY IS + .005 PER INDEX.

 

FEED RATE AND DOWN PRESSURE CAN BE CONTROLLED INDEPENDENTLY FOR FAST, ACCURATE CUTTING. SETUP IS MADE EASY THROUGH THE COLOR-CODED DIAL ALLOWING THE OPERATOR TO SELECT THE OPTIMUM SETTING FOR THE TYPE OF MATERIAL BEING CUT. BOTH SETTINGS ARE MADE AT THE OPERATOR’S STATION.

 

5 H.P. (3.75 KW) INVERTER DRIVE. HYDRAULIC PUMP MOTOR: 1 H.P. (.75 KW) (23 GAL). COOLANT PUMP MOTOR: 1/8 H.P. (0.09 KW) (22 GAL). ALL MOTORS ARE 230-VOLTS, 3 PH. 60 HZ.

MOUNTED ON THE LEFT-HAND SIDE OF THE MACHINE. IT OFFERS FULL CONTROL OF THE ALL THE FEATURES OF THE MACHINE SUCH AS; VISING, SAW FRAME, BUNDLE CLAMPING, TOUCH SCREEN, SHUTTLE ADVANCE & RETRACT, COOLANT, WORK LIGHT AND MORE.

 

CONVENIENTLY LOCATED ON THE OPERATOR’S CONTROL PANEL, THIS TOUCH SCREEN CONTROL ALLOWS THE OPERATOR TO PROGRAM AND STORE UP TO 100 JOBS. INPUTS INCLUDE PART LENGTH FROM 0 TO 999” (25 M) (IN INCHES UP TO 3 DECIMAL PLACES) AND NUMBER OF PIECES TO BE CUT. THE AUTOMATIC PIECE COUNTER STOPS EACH JOB WHEN THE PRE-SET NUMBER OF CUTS HAVE BEEN MADE. THE CONTROL PROVIDES THE OPTION OF RUNNING UP TO 20 PARTS IN ONE JOB CONSECUTIVELY.

 

THE MACHINE WILL SHUT OFF AUTOMATICALLY WHEN MATERIAL IS NO LONGER PRESENT IN THE REAR VISE JAWS, ALLOWING FOR TRULY AUTOMATIC OPERATION.

 

THE HYDRAULIC CLAMPING AND COMBINATION ROLLER BEARING, AND CARBIDE BLADE GUIDES REDUCE HEAT AND BLADE STRESS PROVIDING LONGER BLADE LIFE AND ACCURACIES OF + .002 PER INCH (.051 MM) OF CUT MATERIAL. LARGE ANTI-VIBRATION ROLLERS HELP TO INCREASE BLADE LIFE.

 

WORK HEIGHT IS AUTOMATICALLY SET ALLOWING THE HEAD TO RAISE JUST ENOUGH TO CLEAR THE WORK PIECE WHILE REDUCING CYCLE TIME AND IMPROVING CUTTING PERFORMANCE.

 

POWERED FROM THE MAIN DRIVE SHAFT OF THE SAW, THE BRUSH CHANGES SPEED ALONG WITH THE BLADE TO ASSURE THAT CHIPS ARE BEING REMOVED FROM EACH GULLET OF THE BLADE, IMPROVING CUTTING PERFORMANCE AND BLADE LIFE.

 

POSITIONED DIRECTLY OVER THE WORK AREA TO PROVIDE BETTER ILLUMINATION OF THE CUTTING AREA, THE WORK LIGHT CAN BE TURNED ON AND OFF INDEPENDENTLY FROM THE OPERATOR’S CONTROL PANEL.

 

HYDRAULIC FULL STROKING. FRONT JAWS ARE SPLIT TO REDUCE THE REMNANT TO AS LITTLE AS 2.75” (70 MM). THE SPLIT VISE JAWS ALSO HELP TO REDUCE BURRS LEFT ON THE MATERIAL AND ARE IDEAL FOR BUNDLE CUTTING. HOLDING THE WORK PIECE ON BOTH SIDES OF THE BLADE REDUCES BLADE VIBRATION, PROVIDING MORE ACCURATE CUTS AND LONGER BLADE LIFE. REAR VISE: THE REAR VISE JAW FLOATS HYDRAULICALLY TO ACCOMMODATE CROOKED STOCK ASSURING STRAIGHT, ACCURATE CUTS.

 

THE CHIP AUGER ROTATING IN THE COOLANT RETURN REMOVES CHIPS QUICKLY AND EFFICIENTLY, FREEING THE OPERATOR TO PERFORM MORE PRODUCTIVE OPERATIONS. COOLANT IS ALLOWED TO DRAIN BACK TO THE TANK BEFORE THE CHIPS ARE REMOVED FROM THE MACHINE.

 

HYDRAULIC CLAMPING PRESSURE TO THE WORK HOLDING JAWS CAN BE ADJUSTED AS REQUIRED TO HOLD SOLID OR THIN WALL MATERIAL, ALLOWING THE PIECE TO BE HELD SECURELY AND WITHOUT DISTORTION.

 

3,860 LBS. (1751 KG)

27” (686 MM)

 

HFA260P HORIZONTAL POST STYLE SAW -

HEAVY-DUTY, DOUBLE COLUMN, HIGH SPEED, HYDRAULIC, HORIZONTAL, METAL CUTTING BANDSAW WITH 5 H.P. 1-1/4” BLADE AND AMADA MACHINERY PROGRAMMABLE CONTROL

BLADE AMADA SGLB -

AMADA SGLB BLADE 12' 11" LONG X 1.25" WIDE, 4/6 TOOTH PITCH. THIS IS THE STANDARD BLADE THAT IS INCLUDED WITH MACHINE PURCHASE AND YOU HAVE THE OPTION TO ORDER MORE.

PA10SG1 HYDRAULIC HOLD DOWNS -

THE NESTING FIXTURES FOR VERTICAL CLAMPING ARE DESIGNED FOR HIGH-PRODUCTION MULTIPLE CUTTING. VERTICALLY MOUNTED HYDRAULIC CLAMPS LOCATED ON EACH VISE JAW APPLY DOWNWARD PRESSURE TO HOLD MULTIPLE BAR WORK OR STRUCTURAL SHAPES. MINIMUM CAPACITY (H X W): 1-1/4” X 6” (31.75 MM X 152 MM). MAXIMUM CAPACITY (H X W): 5” X 8” (127 MM X 203 MM).

ML2 AUTOMATIC MIST LUBE -

DROP LUBRICATION SYSTEM. (REQUIRES COMPRESSED AIR CONNECTION

CL2210 UNIST COOLUBE 2210

UNIST COOLUBE 2210 IS THE CUTTING OIL AND LUBRICANT THAT IS SHIPPED WITHIN YOUR ML2 (MIST DROP LUBRICATION SYSTEM). IT IS FORMULATED AS A METAL CUTTING OIL AND LUBRICANT FOR METALS, WOOD, RUBBER, AND MOST PLASTICS. IT IS 100% NATURAL, NON-TOXIC, NON-STAINING, AND WILL NOT OXIDIZE (BECOME STICKY OR LEAVE A RESIDUE). COOLUBE 2210 CUTTING FLUID DOES NOT CONTAIN ANY INGREDIENTS CURRENTLY RECOGNIZED AS HAZARDOUS BY OSHA, IARC OR NIP. COOLUBE 2210 MACHINING OIL WILL NEVER CAUSE DERMATITIS AND IS FORMULATED FROM COSMETIC GRADE RAW MATERIALS, WHICH MAKES IT ENTIRELY WORKER AND ENVIRONMENTALLY SAFE. COOLUBE 2210 IS A USDA CERTIFIED BIOBASED PRODUCT.

FSCC FREE STANDING CONTROL CONSOLE

REPLACES STANDARD CONTROL CONSOLE MOUNTED TO MACHINE BASE WITH A FREE-STANDING PEDESTAL AND 6’ FLEXIBLE ELECTRICAL AND HYDRAULIC LINES.

PA10F055 FIRST SECTION 5’ ROLLER TABLE

5’ (1.5 M) LONG. TABLE IS CONSTRUCTED FROM 4” (102 MM) X 5.4 LBS. (2.5 KG) CHANNEL WITH FIVE 2.5” (63 MM) DIAMETER BALL BEARING ROLLERS ON 12” (305MM) CENTERS. THIS IS THE FIRST TABLE REQUIRED FOR EITHER THE LOADING OR DISCHARGE SIDE OF THE MACHINE (FREE STANDING)

PA10/X055 EXTENSION 5’ ROLLER TABLE

5’ (1.5 M) LONG. TABLE IS CONSTRUCTED FROM 4” (102 MM) X 5.4 LBS. (2.5 KG) CHANNEL WITH FIVE 2.5” (63 MM) DIAMETER BALL BEARING ROLLERS ON 12” (305 MM) CENTERS. FOR USE AS EXTENSION TO FIRST SECTION.

PA10/E11 COOLANT PAN

FITTING THE F055 AND/OR X055 ROLLER CONVEYORS, THE COOLANT PAN COLLECTS AND RETURNS COOLANT BACK TO MACHINE. INCLUDED IS THE PAN, V-TROUGH, AND HANGERS.

 

VOLTAGE

MACHINE COMES STANDARD WITH A 230 VOLT – 3 PHASE – 60 HERTZ CONNECTION (230-3-60).

ALL OTHER VOLTAGES REQUIRE A SEPARATE TRANSFORMER NOT INCLUDED.