Betenbender 6'-240 NEW PRESS BRAKES

Price on Request

Make:: Betenbender

Model:: 6'-240

Year:: New

Ref #:: 148736

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

										
New Betenbender 240 Ton x 6' Hydraulic Press Brake
 Model: 6'-240            Made In The USA
 

 
 SPECIFICATIONS:
 Overall Width 56-1/2"
 Width of Bed 5-1/2"
 Width of Upper Machined Ram 3-3/4"
 Overall Height 111"
 Throat Depth 8"
 Open Height 14"
 Closed Height 8"
 Height of Bed 37"
 Overall Length 100"
 Distance Between Housing 54-1/2"
 Width of Upper Ram 4"
 Width of Upper End Plates 60"
 Press (IPM) 25"
 Rapid Approach (IPM) 50"
 Return to Open (IPM) 70"
 2-Speed Electric Shift - Standard
 HP 30
 Weight 23,000 lbs.(est)
 
 
 STANDARD FEATURES:
 Clamp Type BG-Manual Adjustable X, Y, Z - 24"
 2-Speed Ram (17T-70T models)
 3-Speed Ram (95T-350T models)
 NEMA Electrics
 Three Position Foot Pedal
 Depth Stop with Digital Readout
 Bottom Time Delay
 Hour Meter
 All Hydraulic Fluids Included
 American Made Motor and Valves
 Disconnect Switch
 American Made Hoses and Fittings
 All Steel Construction
 Hydraulic Pressure: 2750 PSI
 Cylinders are steel, double acting piston type with hardened,
     ground and chromed rods
 Hardened Pins with Spherical bearings for alignment
 Front & Back of Bed Machined Smooth for Mounting of Gauges
 Multi-switch control panel (with emergency switch, run-job, and 
     up-down buttons) and 3-position fully guarded switch
 Hand wheel control to .001 for depth of bend adjustment
 Ram Tilt Micrometer
 Pressure Gauge
 Control Panel
 Ram Machined with 1/2" x 3/4" slot. (die riser optional)
 
 
 OPTIONAL ACCESSORIES: (call for pricing)
 Manual Front Reading 24" BG w/ Mechanical Readout
 Power Front Reading BG w/ 5 Station NC "GO-TO" Positioner on 
     Pendant
 Power Ram Adjust w/ 5 Station NC "GO-TO" Positioner on Pendant
 Extra Length on Backgauge
 Micrometer Precision gauge unit
 CNC Ram Stop
 CNC BG
 24" Support Arms (pair) "Slide type"
 Extended Support Arms (each)
 Disappearing Stops
 Work light
 Variable tonnage control
 One shot lubrication
 Oil Cooler
 Light Curtain
 Operator station palm control
 Additional Foot pedal with Key Lock
 Palm buttons/foot control system (hand buttons to preset height,
     stop and hold, foot to continue to shut height)
 Dove Tails
 T-Slots
 Ram machining 
 Bed Machining for angle brackets
 Angle brackets (plate) for top
 Angle brackets (plate) for bottom
 Increase Throat gap or Increase open height
 Increase Stroke Length
 Keylock Switch
 Die Holder-Riser
 Die Rollover bars (recommended for 4/way dies)
 Air Life (recommended for 4/way dies)
 Dual Calibration (In/Metric)
 208 Volt
 Special Paint Colors
 Bolt/Shim Kit for Leveling
 
 





									

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.