Cincinnati-Heald 261, REBUILT BY MRSE IN 1996, EMC, COOLANT ROTARY SURFACE GRINDERS, HZ SPDL (ARTER TYPE)

Price on Request

Make:: Cincinnati-Heald

Model:: 261, REBUILT BY MRSE IN 1996, EMC, COOLANT

Year:: 1996

Ref #:: 168860

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

    
17" Cincinnati-Milacron - Heald Rotary Surface Grinder
 
Model No. 261     S/N: 42176      
 
Rebuilt by M.R.S.E. in 1996
 
 
 SPECIFICATIONS: 
 
Chuck Face Diameter ................ 16- 7/8"
Max. Swing Inside Guards ........... 18- 1/2" 
Std. Wheel Size .................... 14" Dia. X 1"W x 5"B
Max. Distance From Top of Chuck
  to Wheel Center .................. 17-3/4" 
Min. Distance From Top of Chuck 
  to Wheel Center .................. 4-1/4" 
Max. Height Under a New Wheel ...... 10-1/2" 
Total Table Slide Travel ........... 12" 
Grinding Stroke of Table ........... 8"
Table Tilt Adjustment, Convex ...... 17 Degrees 
Table Tilt, Concave ................ 10 Degrees
Table Speeds for Grinding .......... 0 to 12' FPM
Table Speeds for Run-Out ........... 35' FPM 
Chuck Speeds, Variable ............. 50 - 225 RPM 
Chuck Feed Rates ................... 0 - 20 FPM 
Auto Power Downfeed Of Spindle ..... 0.0001" to .0006"
 
Machine Weight, Approx. ............ 8,350 Lbs
Approx Dims. ....................... 78" x 60" x 80"H 
   
 
Equipped With:
* 17" O.S. Walker #16R Electro-Magnetic Chuck, 
   "Tuning Fork Top"
* "Electro-Matic" Neutrofier, 300 Watts,
     with Variable Power Control
* Over-The-Wheel Dresser 
* Wheel Retraction Knob
* Automatic Lubrication Through Hydraulic Reservoir,
    for the Table Ways & Vertical Ways
* Separate Lubrication System for the Chuck
* Coolant Pump & Tank, 33" x 20" x 20"
* 15 HP Spindle Motor 3/60/230-460 Volts
* 3 HP Hydraulic Pump   
* 3/60/220-440 Volt Motors
* Presently Wired for 3/60/220 Volts, 41 FLA
 
** Inspect Under Power in our Harrison, NJ Warehouse ** 
** Superb Condition & Appearance **
** Rebuilt by the Known Heald Rebuilder, M.R.S.E. **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.