Clausing CSG-1224ASDII, 2004, PROG. AUTO IDF, 3X AUTO FEEDS SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Clausing

Model:: CSG-1224ASDII, 2004, PROG. AUTO IDF, 3X AUTO FEEDS

Year:: 2007

Ref #:: 169110

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

                12" x 24" CLAUSING "EQUIPTOP" 
             3-AXIS AUTOMATIC SURFACE GRINDER
 
** MICROPROCESSOR PROGRAMMABLE  AUTO INCREMENTAL DOWNFEED **
 
MODEL: CSG-1224ASDII     S/N: 3007245     NEW: 2007
 
TABLE SIZE .............................. 12" x 24"
MAX. DISTANCE FROM TABLE TO 
 SPINDLE CENTERLINE ..................... 23"
TABLE SPEED, INFIN. VARIABLE ............ 39.4" TO 984" IPM
MAX. TABLE TRAVEL, HYD. ................. 25.56"
MAX. TABLE TRAVEL, MANUAL ............... 28.75"
AUTO CROSSFEED INCREMENT ................ 0.04" TO 0.75"
AUTO CONSTANT FEEDING SPEED ............. 2.5" - 13" IPM
MAX AUTO CROSSFEDD TRAVEL ............... 12.2"
MAX. CROSSFEED, MANUAL .................. 13.4"
CROSSFEED HANDWHEEL, ONE REV. = ......... 0.2"
CROSSFEED HANDWHEEL, GRAD. .............. 0.001"
AUTO INCREMENTAL DOWNFEED ............... 0.00005" TO .0025"
STEP FEED (JOG) ......................... 0.00005"
RAPID TRAVERSE RATE ..................... 6" IPM
MINIMUM DISPLAY VALUE (REVOLUTION) ...... 0.0001"
MINIMUM DISPLAY VALUE (GRADUATION) ...... 0.0001"
GRINDING SPINDLE DRIVE SPEED ............ 1,750 RPM 
STD. GRINING WHEEL ...................... 12" x 1.25"W x 3"B
 
 
WEIGHT APPROX ........................... 5,038 LBS.
APPROX. DIMS. ..................... 90"L-R x 61"F-B x 71"H
 
 
 MACHINE FEATURES:
 
MICROPROCESSOR PROGRAMMABLE 
AUTOMATIC INCREMENTAL DOWNFEED CONTROL:
- SIMPLE TOUCH CONTROL PANEL WITH DIGITAL DISPLAY
- QUICK DIGITAL OUTPUT FEEDBACK BY ENCODER
- DIGITAL DISPLAY FOR SETTING START POINTS, ROUGH GRINDING
   VOLUME,  FINISH GRINDING VOLUME, DOWNFEED FINISH 
   GRINDING VOLUME, PLUNGE & SURFACE GRINDING MODES AS
   STANDARD, TARGET POINT, RISE UP POINT,
   INTERMITTENT SPARK-OUT, AND SPARK-OUT.
- VERTICAL FEED DRIVEN BY DUAL MOTORS, AC MOTOR FOR RAPID
- UP/DOWN AND STEPPING MOTOR FOR MICRO DOWNFEED POSITIONING, 
   SLOW DOWNFEED POSITIONING & SLOW UP/DOWN.
- VERTICAL JOG FEED: 0.00005"
- AUTO INCREMENTAL DOWNFEED RATE:  0.00005" TO 0.0025"
 
 
  ROBUST CAST IRON CONSTRUCTION
  WIDE BASE FOR INCREASED GRINDING STABILITY & ACCURACY
  3-AXIS AUTOMATIC OPERATION
  HYDRAULIC TABLE FEED WITH PRE-SET SPEED FEATURE  
  ELECTRONIC CROSSFEED, STEP & CONTINUOUS FEED CHOICES
  BALLSCREW FOR CROSS MOVEMENT, POWERED BY DC SERVO MOTOR   
  TURCITE-B ON TABLE & SADDLE WAYS FOR INCREASED WAY LIFE & LOW FRICTION
 
 
 EQUIPPED WITH:
- 5 H.P. GRINDING SPINDLE MOTOR
- 12" x 24" FINE-DIVISION ELECTRO-MAGNETIC CHUCK
- VARIABLE HOLD NEUTROFIER CHUCK CONTROL
- MANUAL OVER THE WHEEL DRESSER WITH MICROMETER ADJUSTMENT
- COOLANT SYSTEM WITH PAPER FILTRATION
- "ACU-RITE" DIGITAL READOUT DISPLAY
- WORK LIGHT
- MACHINE IS PRESENTLY WIRED FOR 3/60/230 VOLTS
 
 
** SUPERIOR CONDITION & APPEARANCE - ORIGINAL PAINT **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.