Okamoto ACC-12-24EXB, 2014, PROGRAMMABLE CYCLES & DRESSING SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Okamoto

Model:: ACC-12-24EXB, 2014, PROGRAMMABLE CYCLES & DRESSING

Year:: 2014

Ref #:: 168890

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  12" X 24" OKAMOTO "EXB" SERIES 
        "HIGH-PRECISION" 
  3-AXIS AUTOMATIC SURFACE GRINDER 
 
*** OKAMOTO "EXB SERIES" FANUC MDI/CNC CONTROL ***  
 
 
S/N: 73171     NEW: 2014
 
ACC-EXB SERIES GRINDING CYCLES:
"FANUC" MDI/CNC CONTROL W/9" CRT DISPLAY
-2-AXIS CNC (Y/Z AXES)
-SIMPLE, QUICK TEACH SET-UP OF CYCLE FILLS IN 
  MOST REQUIRED DATA .....  SIMPLE TO LEARN & TO USE
-CAPACITY TO GRIND 3 SURFACES IN A SINGLE SET-UP
-SERVO DRIVEN BALLSCREWS ON BOTH DOWNFEED & CROSSFEED
  FOR ULTIMATE ACCURACY
-FULLY AUTOMATIC GRIND CYCLE WITH ROUGH, FINE, SHIFT-PLUNGE, 
  & RAPID WHEELHEAD RETRACTION
-FULLY-AUTO OVER-THE-WHEEL DRESSER IS PROGRAMMABLE WITH
  AUTO DRESS & WHEEL WEAR COMPENSATION, AND AIR-CUT ALLOWANCE
-INTERRUPT CYCLE AT ANY TIME TO DRESS, THEN RAPID BACK TO 
  WORK AFTER COMPENSATING  
 
 
NOMINAL GRINDING CAPACITY .................. 12" x 24" 
MAXIMUM HEIGHT UNDER 12" WHEEL ............. 13.6"
TABLE SPEED, INFINITELY VARIABLE ........... 3' TO 82' FPM
LONGITUDINAL TABLE, HANDFEED PER REV. ...... 1.85" 
MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL ... 29.5"
AUTO CROSS FEED INCREMENT .................. 0.02" TO 0.80"
AUTO CONINOUS CROSSFEED .................... 0.010 TO 40' FPM
CROSSFEED, PER REV. (X1, X5, X20) .......... 0.01", .05" & .2"
  GRAD. OF HANDWHEEL (x1, x5, x20) ......... 0.0001", .0005"& .002"
MAX. CROSSFEED, MANUAL ..................... 13.5" 
 
AUTO INCREMENTAL DOWNFEED (10) ............. 0.00005" TO .0015"
SPARKOUT PASSES ............................ 0 TO 5
POWER RAPID WHEEL POSITIONING RATE ......... 40" IPM
MANUAL PULSE FEED (x.1, x1, x10) ........... 0.00001", .0001" & .001"
SPINDLE MOTOR .............................. 5 H.P. 
WHEEL SIZE ................................. 12" X 1.5" X 5"
WHEEL SPEED ................................ 6,500 SFPM
GRINDING WHEEL SPEED ....................... 1,800 RPM
 
APPROX. DIMS. FOR OPERATION ................ 108" x 82"D x 71"H
APPROX. MACHINE WEIGHT ..................... 6,175 LBS. 
 
 
EQUIPPED WITH:
12" X 24" "KANETSU" "FINE-DIVISION" "LBP" ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL & DEMAGNETIZER
COOLANT SYSTEM W/PAPER SEPERATOR 
5 H.P. SPINDLE MOTOR 
PRESENTLY WIRED FOR 3/60/200 VOLTS
COMES WITH A TRANSFORMER FOR 230-460-480 VOLTAGES
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCEPTIONAL CONDITION & APPEARANCE **
** QUIET SPINDLE, AXES MOVEMENTS, SMOOTH HYDRAULIC TABLE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.