Webb WL435 / 17"x59" ENGINE LATHES

$7,950

Make:: Webb

Model:: WL435 / 17"x59"

Year:: 1984

Ref #:: 179569

Or call us for a quote at (973) 497-7500 or send us an email at toolroom@machineryvalues.com

17"/25-1/2" x 59" WEBB GAP BED ENGINE LATHE
MODEL: WL435, S/N: 9-8101-35, YEAR: 1984
 
SPECIFICATIONS:
SWING OVER BED ....................... 17-1/8"
SWING IN REMOVEABLE GAP .............. 25-9/16"
SWING OVER CROSS SLIDE ............... 9-3/4"
HOLE THRU SPINDLE .................... 2-3/64"
DISTANCE BETWEEN CENTERS ............. 59"
SPINDLE NOSE ......................... D1-6" CAMLOCK
BED WIDTH ............................ 13-3/4"
SPINDLE SPEED RANGE (12) ............. 32 - 1800 RPM
LONGITUDINAL FEED RANGE  ............. .0018 - .0247 IPR
CROSS FEED RANGE ..................... .00156 - .011 IPR
ENGLISH THREADING RANGE  ............. 4 - 80 TPI
METRIC THREADING RANGE ............... .25 -7mm
TAILSTOCK SPINDLE TRAVEL ............. 6"
TAILSTOCK SPINDLE TAPER .............. #4MT
APPROX WEIGHT ........................ 5,500 LBS
 
EQUIPPED WITH:
INCH/METRIC THREADING CAPABILITY
10" 3-JAW CHUCK
17" FACEPLATE
(2) STEADY RESTS
FOURWAY TOOLPOST
TRAV-A-DIAL FOR LONGITUDINAL CARRIAGE TRAVEL
THREAD DIAL INDICATOR
MICROMETER CARRIAGE STOP
COOLANT SYSTEM
FOOTBRAKE
HARDENED & GROUND BEDWAYS
5 HORSE POWER MAIN MOTOR - 220/440 VOLT 3 PHASE
 
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.