Watch Video:

Willis 1224-3A, NEW 2008, 3-AXIS AUTOMATIC, AUTO IDF SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Willis

Model:: 1224-3A, NEW 2008, 3-AXIS AUTOMATIC, AUTO IDF

Year:: 2008

Ref #:: 164273

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  12" x 24" Willis Hydraulic Surface Grinder 
  w/ Automatic Incremental Downfeed
 
 
Model: KGS-63AHD     S/N: 083526      New:  2008
 
 
Capacity
Overall table working area ................ 12" x 24"
Longitudinal table travel:................. 26"
Cross table travel:........................ 13"
Maximum distance betweek working
  table and spindle center:................ 23.6"
Table load including chuck ................ 925 Lbs.
 
 
Table Cross Feed
Longitudinal table speed:.................. 16 to 82 F.P.M.
Cross feed handwheel is graduated in 
  increments of:........................... 0.001"
Cross feed travel per handwheel rev. ...... 0.2"
Automatic cross feed per stroke of table:.. 0.02" to 0.4"
Power rapid cross feed rate ............... 47.2"
 
Grinding Wheel
Standard wheel dimensions:...... 14" Dia. x 1.5"W x 5"Bore 
Spindle Speed:............................. 1,740 R.P.M.
 
 
Downfeed
Automatic down feed increment: .......... 0.0002" to .001"
Downfeed handwheel is graduated 
 in increments of:......................... 0.0001"
Downfeed per revolution of handwheel: ..... 0.02"
 
Approx. dimensions ..................... 102"L-R x 75"F-B
 
Approximate Weight: ....................... 3,850 Lbs.
 
 
 
Equipped with:
Hydraulical longitudinal feed
V & Flat "Turcite" ways for table feed
Automatic Electro-mechanically powered cross feed
Power rapid cross feed by pushbutton
Automatic incremental downfeed of grinding wheelhead 
Counter for downfeed, number of passes
Sparkout timer
Power rapid elevation of grinding wheelhead
Over-the-wheel dresser with micrometer adjustment
12" x 24" Fine division electromagnetic chuck with 
  console mounted controls including variable magnetic
  strength, magnetization/demagnetization mode selector,
  and voltage gauge meter
14" Diameter x 1.5" Width x 5" Bore Grinding Wheel
Automatic lubrication system
External Hydraulic pump and tank
External coolant system with paper filtration
5 HP 3/60/230-460 volt spindle drive motor 
Machine is presently wired for Volts/3/60/220 volt electrics
 
LINK TO VIDEO: https://youtu.be/K3tTD42pozQ
  
** Excellent Condition & Appearance (Original Paint) **
** Inspect Under Power in our Harrison, NJ Warehouse **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.