Brown & Sharpe 618 MICROMASTER SERIES II, 1984, 2-AXIS AUTO FEEDS SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Brown & Sharpe

Model:: 618 MICROMASTER SERIES II, 1984, 2-AXIS AUTO FEEDS

Year:: 1984

Ref #:: 178634

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  6" x 18" BROWN & SHARPE "#618 MICROMASTER SERIES II" 
   "MADE IN USA" PRECISION HYDRAULIC SURFACE GRINDER 
 
  S/N: 523-6181-9358    NEW: 1984
 
  WIDTH& LENGTH GROUND ................... .. 6" x 18" 
HEIGHT OF WORK GROUND W/STD. 7" WHEEL .... .. 15-1/2" 
MAXIMUM LONGITUDINAL TRAVEL .............. .. 22" 
LONGITUDINAL TABLE SPEED .................... 5 TO 100 FPM
MAXIMUM CROSS TRAVEL ........................ 7" 
AUTOCROSSFEED INCREMENT PER TABLE PASS ...... UP TO 1/4"
HANDWHEEL, HAS ADJUSTABLE DIAL GRADUATED 
TO READ TO .................................. 0.0002" 
FINE-FEED KNOB, ADJACENT TO THE HANDWHEEL ... 0.0001"
VERTICAL TRAVEL OF SPINDLE .................. 15-3/4" 
HANDWHEEL HAS ADJUSTABLE DIAL GRADUATED 
TO READ TO .................................. 0.0002"
FINE-FEED KNOB, ADJACENT TO THE HANDWHEEL ... 0.0001" 
 
APPROXIMATE MACHINE WEIGHT .................. 3,000 LBS 
APPROXIMATE FLOOR SPACE ............... 56"L x 62"D x 68" 
    
EQUIPPED WITH:
HYDRAULIC LONGITUDINAL & CROSS FEEDS
COLUMN DESIGN, COLUMN MOVES FOR CROSS FEED
FINE FEED KNOB FOR BOTH TH CROSS FEED HANDWHEEL
 & THE VERTICAL HANDWHEEL, WITH 0.0001" GRADUATION 
1.5 H.P. BROWN & SHARPE SUPER-PRECISION 
  DIRECT DRIVE SPINDLE
6" X 18" FINE-DIVISION PERMANENT-MAGNETIC CHUCK 
COOLANT SYSTEM WITH COOLANT TANK & PUMP
SELF-CONTAINED HYDRAULIC SYSTEM
MOTORS ON THE MACHINE ARE 3/60/230-460 VOLTS
MACHINE IS WIRED PRESENTLY FOR 3/60/230 VOLTS, 9 FLA
  
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
**** ORIGINAL PAINT - VERY CLEAN ****
** EXCELLENT CONDITION & APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.