Heald 271 TOOLROOM, S/N: 36923, UPDATED ELECTRICS ID / INTERNAL GRINDERS

Price on Request

Make:: Heald

Model:: 271 TOOLROOM, S/N: 36923, UPDATED ELECTRICS

Year:: 1956

Ref #:: 157845

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  HEALD #271 "TOOLROOM" INTERNAL GRINDING MACHINE
 
** 271 TOOLROOM IS A HIGHLY VERSATILE GRINDER **
 
S/N: 36923        NEW: 1956
 
MAXIMUM SWING OVER TABLE ........... 22"
SWING INSIDE STANDARD CHUCK GUARD .. 16" 
ANGULAR ADJUSTMENT OF WORKHEAD ..... 60° 
MAXIMUM TABLE TRAVEL ............... 16"
 
WORKHEAD ANGULAR ADJUSTMENT ........ UP TO 60° INCLUDED ANGLE
WORKHEAD POSITIONING SLIDE TRAVEL .. 6" FRONT, 11- 1/2" REAR 
TABLE SPEEDS FOR GRINDING .......... 0 TO 18' FPM 
TABLE RAPID TRAVERSE RATE .......... 35' FPM
WOKRHEAD SPEEDS INF. VARIABLE ...... 133 TO 400 RPM
ONE TURN OF CROSS FEED HANDWHEEL ... 0.050" ON DIA. 
ROUGHTING CROSS FEED ............... 0.0001" - .0006" ON DIA.
FINISH CROSS FEED, NOT ADJUSTABLE ....... 0.0001" ON DIA.
  
APPROXIMATE MACHINE WEIGHT ......... 8,200 LBS 
APPROX. LENGTH x WIDTH OF BASE ..... 66- 1/2" x 28- 1/2"
APPROX. FLOOR SPACE (w/COOLANT) .... 91" x 87" 
 
 
 EQUIPPED WITH:
UPDATED IN 2017 WITH TWO "LEESON" ELECTRONIC DRIVES, 
  (1) FOR THE WORKHEAD, THE 2nd FOR THE WHEELHEAD
UPDATED WITH VS CONTROL RHEOSTATS FOR WORKHEAD & WHEELHEAD
"SENSITIVE" FACING ATTACHMENT
WORK HEAD CROSS SLIDING FEATURE
WORKHEAD SWIVELS WITH HANDWHEEL FOR EASY SET-UP
GUARDING & CHUTE FOR COOLANT (NO COOLANT TANK OR PUMP)
(1) HEALD "RED HEAD" GRINDING SPINDLE, TYPE #51-1, 7,500 RPM,
  REBUILT IN 1993 BY "SOPKO"  
DRESSER
CAM-LOCK SPINDLE TO ACCEPT A CHUCK OR FACEPLATE
EASY TO SERVICE PULL-OUT HYDRAULIC SYSTEM
5 H.P./3/60/220-440 VOLT WHEELHEAD MOTOR 
1.5 H.P. MOTOR FOR THE WORKHEAD
MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS
 
 
** INSPECT IN HARRISON, NJ WAREHOUSE ** 
* * EXCELLENT CONDITION & APPEARANCE * * 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.