Niagara HBM-100-8-10 PRESS BRAKES w/CNC BACK GAUGES

$34,500

Make:: Niagara

Model:: HBM-100-8-10

Year:: 1996

Ref #:: 164099

Or call us for a quote at (973) 497-7500 or send us an email at presses@machineryvalues.com

 
100 TON x 10' NIAGARA HYDRAULIC PRESS BRAKE
MODEL HBM-100-8-10        S/N P-54413        NEW 1996 
 
CAPACITY (AT OR NEAR BOTTOM OF STROKE) ... 100 TON
LENGTH OF BED ............................ 120"
BENDING CAPACITY ......................... 5/16" x 4'6"
                 ......................... 1/4" x 5'6"
                 ......................... 3/16" X 8'
                 ......................... 10 GA. X 10'
DISTANCE BETWEEN HOUSINGS ................ 102"
STROKE ................................... 7"
OPEN HEIGHT .............................. 14"
CLOSED HEIGHT ............................ 7"
THROAT DEPTH ............................. 7"
SPEED (ADVANCE) .......................... 117 IPM
      (ANTI BACKBEND ..................... 15 IPM
      (RAPID RETURN) ..................... 117 IPM
 
MOTOR .................................... 7.5 HP 230/460
DIMENSIONS: .............................. 132" L x 50" W x 102" H
WEIGHT ................................... 12,000 LBS.
 
EQUIPPED WITH:
- HURCO AUTOBEND 7 CNC 2-AXIS BACK GAUGE
- RAM MOUNTED OPERATOR'S STATION W/2 SINGLE STROKE PALM
BUTTONS, 2 INCH BUTTONS, RAM STOP, UP-DOWN DIRECTIONAL
CONTROL LIGHTS, AND RAM UP AND DOWN BUTTONS.
- PORTABLE FOOT SWITCH
- DUAL SPEED OPERATING MODES: ANTI-BACKBEND THROUGHOUT
WORKING STROKE OR RAPID ADVANCE WITH AUTOMATIC CHANGE TO
ANTI-BACKBEND (THE POINT IN THE STROKE IS FULLY
ADJUSTABLE).
- ELECTROMECHANICAL STROKE CONTROL (BED REFERENCED) WITH
BOTTOM STROKE LIMIT DISPLAYED BY A DRO CALIBRATED IN .001"
INCREMENTS.
- MICROMETER TYPE RAM TILT ADJUSTMENT GRADUATED TO .001"
PERMITTING RAM TILT ADJUSTMENTS UP TO 1/2" IN EITHER
DIRECTION.
- RAM ARREST FEATURE WHICH STOPS THE RAM AT ANY PRESELECTED 
POINT PRIOR TO MATERIAL CONTACT.
- NON-METALIC WAYS.
- NARROW-TYPE CROWN FILLER BLOCK.
- FULL COMPLIMENT OF UPPER DIE CLAMPS.

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.