Watch Video:

Okamoto ACC-618DX3, 2015, ELECTRONIC AUTO IDF, 3X AUTO SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Okamoto

Model:: ACC-618DX3, 2015, ELECTRONIC AUTO IDF, 3X AUTO

Year:: 2015

Ref #:: 178246

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

   
          6" X 18" OKAMOTO "HIGH-PRECISION" 
          3-AXIS AUTO FEEDS SURFACE GRINDER 
   W/"DX" SERIES PROGRAMMABLE AUTO INCREMENTAL DOWNFEED
 
 MODEL: ACC-618-DX3      S/N: 45958     NEW: 2015
 
NOMINAL GRINDING CAPACITY .................. 6" x 18" 
MAXIMUM HEIGHT UNDER 8" WHEEL .............. 11.7"
TABLE SPEED, INFINITELY VARIABLE ........... UP TO 82' FPM
MAX. LONGITUDINAL TABLE MOVEMENT, MANUAL ... 24"
AUTO CROSS FEED INCREMENT .................. 0.002" TO 0.40"
AUTO CONINOUS CROSSFEED .................... 4' TO 40' FPM
CROSSFEED, MANUAL, HAND FEED PER REV. ...... 0.25"
                   GRAD. OF HANDWHEEL ...... 0.0004"
FINE FEED KNOB FOR CROSSFEED, GRAD. ........ 0.00002"
MAX. CROSSFEED, MANUAL ..................... 7" 
AUTO INCREMENTAL DOWNFEED INCREMENTS ....... 0.00005" TO .0015"
POWER RAPID WHEEL POSITIONING RATE ......... 16" IPM
SPINDLE MOTOR .............................. 2 H.P. 
WHEEL SIZE ................................. 8"DIA. x 1"W x 1.25"B
 
APPROX. DIMS. FOR OPERATION ................ 85" x 63"D x 70"H
APPROX. MACHINE WEIGHT ..................... 2,500 LBS. 
 
MACHINE FEATURES:
"DX" SERIES PROGRAMMABLE ELECTRONIC AUTO INCREMENTAL DOWNFEED:
-AC SERVO DRIVEN DOWNFEED
-AUTO INCREMENTAL DOWNFEED FOR BOTH SURFACE & PLUNGE
  OPERATIONS
-DIGITAL DISPLAY FOR THE VERTICAL AXIS
-DUAL RATE AUTO DOWNFEED W/COARSE & FINE SELECTIONS
-SPARKOUT PASSES (0 TO 5) W/AUTO TABLE PARK AT
  COMPLETION OF GRIND CYCLE
-ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT
  W/EACH GRAD. EQUIVALENT TO .00001", .0001" OR .001"
-POWER RAPID WHEEL POSITIONING 
 
HYDRAULIC TABLE TRAVERSE
ELECTRONIC AUTOMATIC CROSSFEED
 
EQUIPPED WITH:
6" X 18" "KANETSU" MODEL KESL-1545 "LBP"
  FINE-DIVISION ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL ON MACHINE'S CONSOLE
"COMBINATION" COOLANT SYSTEM & DUST COLLECTOR
OVER-THE-WHEEL DRESSER WITH MICROMETER ADJUSTMENT 
-"DRO PROS" MODEL NO.EL402-G TWO-AXIS DIGITAL DISPLAY,
  WITH ONE AXIS HOOKED UP WITH A SCALE, 
  FOR THE VERTICAL AXIS
2 H.P./220-230-440-460 VOLT SPINDLE MOTOR 
MACHINE IS PRESENTLY WIRED FOR 220 VOLTS
 
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE - ORIGINAL PAINT **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.