K.O. LEE "DAKOTA" SERIES
UNIVERSAL TOOL & CUTTER GRINDER
WITH BALL BEARING TABLE, FRONT & REAR HANDWHEELS
** DAKOTA SERIES MACHINES HAVE A TILTING & SWIVELING WHEELHEAD **
MODEL: B6062B S/N: 21855-NM NEW: 1982
SWING OVER TABLE ................................ 12-1/4"
DISTANCE BETWEEN TAILSTOCKS ..................... 32"
TABLE WORKING SURFACE ........................... 5-1/4" X 37-1/4"
SUB TABLE ....................................... 8" X 48"
LONGITUDINAL TABLE TRAVERSE ..................... 20"
TABLE FEED PER REV. OF HANDWHEEL:
FAST ............................................ 2-13/16"
SLOW ............................................ 9/16"
CROSS FEED ...................................... 8"
FEED PER REV. OF HANDWHEEL (.001" GRAD.) ........ 0.100"
VERTICAL MOVEMENT OF COLUMN ..................... 10-1/2"
FEED PER REV. OF HANDWHEEL (.001" GRAD.)......... 0.050"
COLUMN DIAMETER ................................. 6"
MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL
SHAFT TO TABLE .................................. 5-3/8" / 15-1/4"
MAXIMUM DISTANCE FROM COLUMN TO
OUTSIDE OF STRAIGHT WHEEL; DOVETAIL SLIDE
NOT EXTENDED, SPINDLE 90 DEG. TO TABLE ......... 6-3/8"
MAXIMUM DISTANCE FROM COLUMN TO
OUTSIDE OF STRAIGHT WHEEL; DOVETAIL
SLIDE EXTENDED, SPINDLE 90 DEGREES TO TABLE .... 11-1/2"
TABLE SWIVELS (CALIBRATION: 3" PER FT.,
15 DEG. EITHER SIDE OF CENTER) ................. 225 DEGREES
WHEEL HEAD SWIVEL ............................... 360 DEGREES
MAXIMUM I.D. DEPTH, HOLE SIZE 9/32" TO 2" ....... 3-1/2"
MAX. CROSS FEED SURFACE GRINDING W/8" WHEEL ..... 5"
SPINDLE SPEED RANGE
(HEAVY DUTY WHEELHEAD, MODEL #B6055HD) .......... 2840, 3450, 4190 & 5330 RPM
GRINDING WHEEL SIZES ............................ 3.5" TO 8" DIAMETER
APPROXIMATE MACHINE WEIGHT ...................... 1,300 LBS
MACHINE FEATURES:
"DAKOTA" HEAVY DUTY #B6055HD UNIVERSAL GRINDING
WHEELHEAD FEATURES:
- SWIVELLING& TILTING (22 DEG. EITHER SIDE OF VERTICAL)
- 1 H.P. MOTOR WIRED FOR 3/60/230-460 VOLT OPERATION
- 3-1/2" TO 8" DIAMETER WHEELS
EQUIPPED WITH THE FOLLOWING OPTIONS:
BALL BEARING TABLE
FRONT & REAR HANDWHEELS FOR TABLE TRAVERSE
K.O. LEE MODEL B9043-12BS (S/N: 12641 NM)
MOTORIZED WORKHEAD FOR THE "DAKOTA" SERIES MACHINES,
12- 1/4" SWING
-5C COLLET DRAW BAR
K.O. LEE TAILSTOCKS FOR THE "DAKOTA" SERIES MACHINES
K.O. LEE B709NFP1 ELECTRICAL PACKAGE, PUSH BUTTON STATION, 110 V, FOR MAIN MOTOR
MACHINE IS PRESENTLY WIRED FOR EITHER 3/60/230 OR 460 VOLTS
** "EXCELLENT" CONDITION & APPEARANCE (ORIGINAL PAINT) **
** F.O.B OUR HARRISON, NJ WAREHOUSE **