Topper TCS 2000II * NEW ON SKID * CNC TURNING CENTERS - CNC LATHES

$50,000

Make:: Topper

Model:: TCS 2000II * NEW ON SKID *

Year:: 2023

Ref #:: 179397

Or call us for a quote at (973) 497-7500 or send us an email at cncmachines@machineryvalues.com

TONGTAI TOPPER TCS 2000II
BUILT 2023 NEVER INSTALLED STILL ON METAL SKID FROM FACTORY
 
MACHINE SPECIFICATIONS
Capacities
Swing over bed/Front cover:                     20.47"
Standard turning diameter:                      11.8" 
Swing over carriage:                            12.6"
Maximum cross travel:      5.9" +.787” w/ 12 station turret)
Maximum longitudinal travel (Z axis):           15.75"
Distance between centers:                       19.7”
 
Spindle
Spindle Motor:                                   20 HP
Spindle nose:                                    A2-6
Spindle RPM:                              45-4500 (8” Chuck)
Hole through spindle:                            2.4"
Bar Capacity:                                    2.01”
Spindle bearing diameter:                        3.9"
Spindle inside taper:                            M.T. 5
Hydraulic chuck:                                 8” 3-Jaw
 
Turret
Turret tool positions:                           12
Turret type:                                     Servo
Tool mounting:                             Block type or VDI
O.D. tool shank size:                            1”
I.D. tool shank size:                            1.25”
Index Time:            .23 seconds / .56 seconds 180 degrees
 
Tailstock
Quill diameter of tailstock:                   2.95"
Quill stroke of tailstock:                     3.94"
Quill taper of tailstock:                      M.T. #4
Tailstock body travel:                (manual)  10.8"                                               
 
Ballscrews and axis motors
Z axis ballscrew diameter                                                      32mm (1.25”) x 12 pitch
X axis ballscrew diameter                                                      32mm (1.25”) x 10 pitch
Ballscrew type                                                                 Class 3 double nut pre-loaded
Ballscrew mounting type                                                        Pre-tensioned
X-Z servo motor HP                                                             X 2.4HP, Z 2.4HP
Servo motor mounting                                                           Direct coupled
 
Feeds
Rapid Traverse Rate X, Z                                                       1181, 1181 IPM
Cutting feed rate                                                              0.0001 - 19.7 IPR
Positioning accuracy                                                           +/- .0002" full stroke
Repeatability                                                                  .0001"
 
General
Coolant tank capacity                                                          30 gallons
Coolant pump motor                                                             .5 HP
Machine Weight                                                                 7,700 LBS / 9,020 for TC-2000L)
Floor Space (with chip conveyor)                                               128" (135” for TC-2000L) X 87" x 72"
Machine Power Source                                                          **208/220 Volts, 3 Phase 75A**
 
Includes:
1)Fanuc 0i-TF Plus, 10.4’’ LCD
2)4500 rpm, 15/11 KW
3)A2-6, 8’’ chuck
4)Servo Turret 12 station
5)Chain type Chip Conveyor + trolley
6)Bar feeder interface
7)Oil Skimmer
8)Manual tool presetter
 

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.