---

Watch Video:

Chevalier FSG-1628AD, NEW 1998 PROG. AUTO IDF, 3X AUTO FEEDS SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:

Chevalier

Model:

FSG-1628AD, NEW 1998 PROG. AUTO IDF, 3X AUTO FEEDS

Year:

1998

Ref #:

166502

Get a quote

Get financing

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

---

  16" X 28" CHEVALIER PRECISION SURFACE GRINDER

    W/PROGRAMMABLE MICROPROCESSOR AUTOMATIC

  INCREMENTAL DOWNFEED CONTROL (PENDANT MOUNTED)

 

  MODEL: FSG-1628AD  S/N: G2879001  NEW: 1998

 

MAX. GRINDING CAPACITY ....................... 16" x 28"

MAX. LONGITUDINAL TABLE TRAVEL, HYDRAULIC .... 31- 5/16"

MAX. LONGITUDINAL TABLE TRAVEL, MANUAL ....... 29 -1/2"

MAX. CROSSFEED TRAVEL, AUTOMATIC ............. 16"

MAX. CROSSFEED TRAVEL, MANUAL ................ 18"

DIST. FROM SPINDLE CENTER TO TABLE ........... 24-3/8"

VARIABLE TABLE SPEED, HYDRAULIC ......... 16' TO 82' FPM

AUTOMATIC CROSSFEED INCREMENT ........... 1/8" TO 1-1/4"

CROSSFEED HANDWHEEL, PER GRADUATION .......... 0.0025"

PER REVOLUTION ............................... 0.25"

MICROFEED, PER REVOLUTION .................... 0.0005"

PER GRADUATION ............................... 0.00005"

AUTOMATIC INCREMENTAL DOWNFEED ....... 0.00005" TO .002"

AUTO DOWNFEED DIAL PER GRADUATION ............ 0.0005"

PER REVOLUTION ............................... 0.05"

MICROFEED .............................. 0.00005"/.0001"

RAPID TRAVERSE RATE .......................... 8" IPM

SPINDLE MOTOR ................................ 5 HP

STANDARD GRINDING WHEEL ............ 14"DIA. x 2"W x 5"B

 

APPROX. WEIGHT ............................ 6,283 LBS

APPROX. DIMENSIONS ................... 103" x 76" x 88"H

 

  EQUIPPED WITH:

HYDRAULICALLY ACUTATED LONGITUDINAL TABLE FEED

ELECTROMECHANICALLY ACTUATED FEED OF SADDLE

PENDANT MOUNTED AND MICROPROCESSOR CONTROLLED AUTOMATIC

  INCREMENTAL DOWNFEED OF GRINDING WHEELHEAD FROM

  0.00005" - 0.002" IN SURFACE OR PLUNGE MODES OF

  OPERATION.  FULLY AUTOMATIC GRINDING CYCLE INCLUDING

  RAPID ADVANCE OF GRINDING WHEELHEAD, 0 T0 7 SPARKOUT

  PASSES, AND RETRACTION OF WHEELHEAD TO A PRE-SET

  DISTANCE AT THE COMPLETION OF THE CYCLE.

TABLE AND SADDLE GUIDE WAYS MADE OF SPECIAL STEEL RAILS

  WITH HIGH ACCURACY STEEL ROLLERS

PRECISION NEEDLE ROLLER BEARINGS USED ON THE ELEVATING

  GUIDE WAYS

FINE (MICRO) FEEDS GRADUATED TO .00005" FOR VERTICAL

  AND CROSS FEEDS

15-3/4" X 27- 9/16" KANETSU ELECTROMAGNETIC CHUCK WITH

  A PENDANT MOUNTED POTENTIOMETER FOR VARIABLE HOLDING

  POWER AND A SELECTOR SWITCH FOR AUTOMATIC

  DEMAGNETIZATION OF WORK PIECE

COOLANT SYSTEM W/PAPER FILTRATION

EXTERNAL HYDRAULIC PUMP AND TANK

5 HP 3/60/230-460 VOLT DRIVE SPINDLE MOTOR

MACHINE IS WIRED FOR 230 VOLTS FROM THE FACTORY

 

 

Link to video:

https://youtu.be/Wnv0Vn1NJwk?si=BFEjNItcULjsJEaq

 

** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **

** ORIGINAL PAINT - SERIOUSLY BARELY USED MACHINE!! **

** SUPERIOR APPEARANCE & CONDITION **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.