Chevalier FSG-1632AII, 2006, PROG. AUTO IDF, 3X AUTO FEEDS SURFACE GRINDERS, HYDRAULIC

Price on Request

Make:: Chevalier

Model:: FSG-1632AII, 2006, PROG. AUTO IDF, 3X AUTO FEEDS

Year:: 2006

Ref #:: 169232

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

   
16" X 32" CHEVALIER PRECISION SURFACE GRINDER 
 W/PROGRAMMABLE MICROPROCESSOR AUTOMATIC 
 INCREMENTAL DOWNFEED CONTROL (PENDANT MOUNTED) 
 
MODEL: FSG-1632ADII      S/N: GB95A005    NEW: 2006
 
 
TABLE SIZE............................... 15-3/4" x 31-1/2"
MAX. GRINDING CAPACITY .................. 16" X 32" 
MAX. LONGITUDINAL TABLE TRAVEL, HYD. .... 32-5/8" 
MAX. LONGITUDINAL TABLE TRAVEL, MANUAL .. 33-3/8" 
MAX. CROSSFEED TRAVEL, AUTOMATIC ........ 16" 
MAX. CROSSFEED TRAVEL, MANUAL ........... 18" 
DIST. FROM SPINDLE CENTER TO TABLE ...... 24-3/8" 
VARIABLE TABLE SPEED, HYDRAULIC ......... 16' TO 82' FPM 
AUTOMATIC CROSSFEED INCREMENT ........... 1/8" TO 2" 
CROSSFEED HANDWHEEL, PER GRADUATION ..... 0.0025" 
PER REVOLUTION .......................... 0.25" 
MICROFEED, PER REVOLUTION ............... 0.005" 
PER GRADUATION .......................... 0.00005" 
AUTOMATIC INCREMENTAL DOWNFEED .......... 0.000050" TO .002" 
AUTO DOWNFEED DIAL PER GRADUATION ....... 0.0005" 
PER REVOLUTION .......................... 0.05" 
MICROFEED ............................... 0.00005"/.0001" 
RAPID TRAVERSE RATE ..................... 8" IPM 
SPINDLE MOTOR ........................... 5 HP
STANDARD GRINDING WHEEL ................. 14"DIA. x 2"W x 5"B 
 
APPROX. WEIGHT .......................... 6,400 LBS 
APPROX. DIMENSIONS ...................... 102" x 69" x 75"H 
 
  EQUIPPED WITH:
HYDRAULICALLY ACUTATED LONGITUDINAL TABLE FEED
ELECTROMECHANICALLY ACTUATED FEED OF SADDLE
AC SERVO VERTICAL DRIVE
PENDANT MOUNTED AND MICROPROCESSOR CONTROLLED AUTOMATIC
  INCREMENTAL DOWNFEED OF GRINDING WHEELHEAD FROM 0.00005"
  T0 0.002" IN SURFACE OR PLUNGE MODES OF OPERATION.  FULLY
  AUTOMATIC GRINDING CYCLE INCLUDING RAPID ADVANCE OF
  GRINDING WHEELHEAD, 0 T0 7 SPARKOUT PASSES, AND RETRACTION
  OF WHEELHEAD TO A PRE-SET DISTANCE AT THE COMPLETION OF
  THE CYCLE.
TABLE AND SADDLE GUIDE WAYS MADE OF SPECIAL STEEL RAILS
  WITH HIGH ACCURACY STEEL ROLLERS
PRECISION NEEDLE ROLLER BEARINGS USED ON THE ELEVATING
  GUIDE WAYS
FINE (MICRO) FEEDS GRADUATED TO .00005" FOR VERTICAL &
  CROSS FEEDS
15-3/4" X 31-1/2" KANETSU "CROSS POLE" 
  ELECTRO-MAGNETIC CHUCK WITH A PENDANT MOUNTED
  POTENTIOMETER FOR VARIABLE HOLDING POWER AND A
  SELECTOR SWITCH FOR AUTOMATIC DEMAGNETIZATION 
  OF WORK PIECE.
COOLANT SYSTEM w/PAPER FILTRATION 
POWER "OVER-THE-WHEEL" DRESSER, .00025" GRADUATION
EXTERNAL HYDRAULIC PUMP AND TANK
5 HP 3/60/230-460 VOLT DRIVE SPINDLE MOTOR
MACHINE IS PRESENTLY WIRED FOR 3/60/230 VOLTS
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** EXCELLENT CONDITION & APPEARANCE - ORIGINAL PAINT  **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.