Myford MG12-HA, NEW 1979, HYD. TABLE, AUTO INFEED, RAPID, PLAIN CYLINDRICAL GRINDERS

Price on Request

Make:
Myford
Model:
MG12-HA, NEW 1979, HYD. TABLE, AUTO INFEED, RAPID,
Year:
1979
Ref #:
161560

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com


  5" X 12" MYFORD HIGH-PRECISION (MADE IN ENGLAND)
     PLAIN HYDRAULIC CYLINDRICAL GRINDER
 
  MODEL: MG12-HA      S/N: HA-140691      NEW: 1979
 
MAXIMUM GRINDING DIAMETER ............... 3"
SWING OVER TABLE ........................ 5"
CAPACITY BETWEEN CENTERS ................ 12"
MAXIMUM TABLE TRAVEL .................... 13-3/4"
TABLE SWIVELS EITHER WAY ................ 10 DEGREES
TABLE TRAVEL PER REV. OF HANDWHEEL ...... 0.44"
HYDRAULIC TABLE TRAVERSE ................ 0 TO 120" IPM
DWELL (CARRIAGE) ........................ 0 TO 8 SECONDS
 
WHEELHEAD (ALL GRADUATIONS,
 ON WORK DIAMETER):
TOTAL TRAVEL BY FEED SCREW .............. 3-7/8"
HYDRAULIC RAPID RETRACTION .............. 1-1/8"
INFEED PER REV. OF HANDWHEEL ............ 0.04"
WHEEL FEED GRADUATION ................... 0.0002"
FINE FEED TO DEAD STOP .................. 0.00005"
INTERMITTENT INFEED, COARSE, MAXIMUM .... 0.002"
INTERMITTENT INFEED, FINE, MINIMUM ...... 0.00005"
WHEEL SPEEDS (2) ........................ 1830 & 1988 RPM
GRINDING WHEEL .......................... 12" X 1-1/2" X 5"
MIN. WHEEL DIA. FOR ZERO WORK DIA. .. ... 10"
 
WORKHEAD:
SPINDLE SPEEDS, INFINITELY VARIABLE ..... 50 TO 900 RPM
CAPACITY THRU STANDARD DRAW TUBE ........ 3/4"
MAXIMUM COLLET CAPACITY ................. 3/4"
APPROXIMATE WEIGHT ...................... 2,080 LBS
 
  EQUIPPED WITH:
HYDRAULIC TABLE TRAVERSE
AUTOMATIC INFEED @ TABLE REVERSAL
VARIABLE DWELL @ EACH END OF TABLE MOVEMENT
HYDRAULIC RAPID ADVANCE AND RETRACTION OF GRINDING WHEEL
WORKHEAD W/DUAL LIVE/DEAD SPINDLE
DRAWBAR WITH COLLET NOSE & CENTER
IENFINITELY VARIABLE WORKHEAD SPINDLE SPEEDS
AUTOMATIC LUBRICATION FOR WHEELHEAD AND CARRIAGE WAYS
COOLANT SYSTEM
SEPERATE ELECTRICAL CONSOLE CONTROL
MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS
 
 
  ** VERY GOOD CONDITION& APPEARANCE **
** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.

Similar Machines

We're here to help

Looking for a specific machine?

Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice: (973) 497-7500
Fax: (973) 497-7501
Email
sales@machineryvalues.com
Address
401 Supor Blvd.
Harrison, NJ 07029
Phone
Voice:
(973) 497-7500
Fax:
(973) 497-7501
image description

Buy on ebay

Shop now

Get Financing

Apply now