Watch Video:

Myford MG12, HAND FEEDS, 1969, 10" WHEEL, PLAIN CYLINDRICAL GRINDERS

Price on Request

Make:: Myford

Model:: MG12, HAND FEEDS, 1969, 10" WHEEL,

Year:: 1969

Ref #:: 163593

Or call us for a quote at (973) 497-7500 or send us an email at grinders@machineryvalues.com

  5" X 12" MYFORD "MADE IN ENGLAND" "PRECISION" 
      I.D./O.D. CYLINDRICAL GRINDER, 
    HAND FEEDS - ALL MANUAL OPERATION
 
  MODEL: MG12    S/N: S86765CB     NEW: 1969 
 
MAXIMUM GRINDING DIAMETER .................. 3" 
SWING OVER TABLE ........................... 5" 
MAXIMUM TABLE TRAVEL ....................... 13-3/4" 
CAPACITY BETWEEN CENTERS ................... 12" 
TABLE SWIVELS EITHER WAY ................... 7 DEGREES 
TABLE TRAVEL PER REVOLUTION OF HANDWHEEL ... 2.04"& 0.51" 
 
  WHEELHEAD:
TOTAL TRAVEL ............................... 3" 
FINE FEED ADJUSTER (NUMBERED DIVISIONS) .... 0.0001" 
WHEEL SPEEDS (2) ........................... 2200 & 2500 RPM 
GRINDING WHEEL (RECESSED) .................. 10" X 1" X 3" 
WHEELHEAD MOTOR ............................ 2 H.P. 
 
  WORKHEAD:
WORKSPEEDS, STEPLESSLY VARIABLE ............ 50 TO 900 RPM 
CAPACITY THROUGH STANDARD DRAW TUBE ........ 3/4" 
MAXIMUM COLLET CAPACITY .................... 3/4" 
WORKHEAD MOTOR ............................. 1/2 H.P.
  
APPROXIMATE MACHINE WEIGHT ................. 1,500 LBS 
 
  EQUIPPED WITH:
HAND FEEDS, ALL MANUAL
10" GRINDING WHEEL 
MYFORD DUAL LIVE/DEAD WORKHEAD
ACCESSORY FOR USING THE DEAD SPINDLE SET-UP
3-JAW & 4-JAW CHUCKS
DRAWBAR FOR 3C COLLET
TABLE MOUNTED WHEEL DRESSER
COOLANT SYSTEM, GOES BEHIND THE MACHINE 
3/60/220-440 VOLT ELECTRICS
MACHINE IS PRESENTLY WIRED FOR 220-230 VOLTS
 
AVAILABLE TO PURCHASE ACCESSORIES FOR THIS MACHINE, P.O.R.:
MYFORD RADIUS DRESSER
MYFORD ANGLE DRESSER
MYFORD CENTER POINT ATTACHMENT
MYFORD INTERNAL GRINDING ATTACHMENT
 
 
 
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** QUIET WHEELHEAD & WORKHEAD **
** EXCELLENT CONDITION & APPEARANCE - ORIGINAL PAINT **
** SERVICED AND READY FOR DELIVERY **

DISCLAIMER: The information presented in the write ups and the photographic representations of the equipment are believed to be accurate at the time the pages are created. The information presented on the web site should not be used for formal quotation. Price and information presented in the write ups on the web site are subject to change without notice. Machinery Values claims no responsibility for inaccuracies of the information presented on the pages of this website. Please contact one of our sales representatives if you require more information or a current formal quotation.